Saturday, September 19, 2009

My Finished Work on Thearica's Block

Thearica's beautiful block in our CQI FFT #9 round robin is rapidly making the rounds, and is nearly ready to find it's way back home. I've finished my work on the block and am ready to send it on to Ellen, who will be the the last to work on it before it heads back home to Thearica.

Nicki was the first to work on Thearica's block, and she started by adding one of her delicately beautiful hand-dyed pieces of lace in the upper right corner, which she then embellished with silk-ribbon embroidered flowers and beadwork. She then added a beautiful band of silk-ribbon roses, silk-ribbon leaves and embroidered trim - see the photo below. The little butterfly in the upper right corner is also Nicki's work.

Darlene was the second to work on the block, and her addition of the lovely white lace basket (which she made on her embroidery machine), filled with silk-ribbon flowers and leaves added to the block's elegance. She then added the adorable lace-framed kitten applique, as well as a great tag-sale find of a pin with a really cute kitten playing with a ball of yarn, adding the perfect touch of whimsy!! Darlene cleverly wrapped yarn around the existing metal ball before attaching the pin to the block. Darlene also embellished several seams on the block.
With each round of embellishing, Thearica's block is taking on it's own glitzy, glittery, girly personality!!!


Nicki added the really beautiful band of silk-ribbon roses and leaves, and then further embellished with pearls and buttonhole-stitch embroidered lavender trim. The ruched purple ribbon at the top center of the block is also Nicki's beautiful work.
The lavender-colored flower in the corner of the above picture is my work.


Using one strand of DMC thread, I made the tiny bees with four French knots (three wraps each), one black knot at each end, and two yellow knots in the middle. The wings are two metallic thread lazy daisy stitches on each side that are placed in between the two yellow knots. The dotted "speed lines" are tiny back stitches done with one strand of black DMC thread.
My favorite metallic thread is "SULKY Metallic 142 7026." It is soft, flexible, very easy to hand sew, and has a beautiful metallic sparkle. This particular spool is a variegated silver, blue, pink mix that goes with any background color. Just beautiful stuff!!!
NOTE: To give a bit of sparkle, you can substitute beads for the French knots. The remaining instructions are the same.


The web is made with metallic thread (see note above regarding SULKY metallic thread), and the spider is made with two drop beads, a small black bead for the head, and a larger iridescent blue-green bead for the body. The legs are made with glossy black beading thread.
I was the third to work on the block, and my additions were the fan in the lower right corner, the beaded dragonfly and the flowers just above the fan, the spider and spider web, the lavender colored flower in the upper left corner, the tiny bees in the lower left corner, and the cretan-stitch embellished seam across the top of the center patch. I also added beads, sequins and fluff in several places.
Hope you enjoyed seeing our work!

Friday, September 4, 2009

September's Free Silky - Strawberry & Ladybug


Two of my favorite painting subjects, strawberries and ladybugs, teamed up for September's free silky! I hope you will enjoy using it in one of your CQ blocks, paper or fiber creations.
Remember, as always, you may copy and print the image for your own use, including for swaps and round robins, but not for mass use or publication.
Enjoy!!!

Sunday, August 30, 2009

Pat Winter's Bird's Nest

WOW!!!
I won one of Pat Winters' exquisite little bird's nests from her blog drawing!!!!!!!! It's only about 1/2" across; what a tiny treasure!
See the picture below.

Thursday, August 20, 2009

Pat Winter's Bird Nests

If you love crazy quilting, fiber arts, collage, or simply love tiny treasures of all sorts, you'll love seeing the enchanting robin's nest that Pat Winter has created. If you'd like a chance to win this little charmer, visit Pat's blog. http://gatherings100.blogspot.com/

Pat Winter's Robin's Nest






Thursday, August 6, 2009

Finished My Work on Darlene's CQ Block

Darlene, your block is ready to go on to Ellen...


I finished my work on Darlene's CQ Block




Layered Seam Close Up


Close Up of Forget-Me-Not Flowers

Center Area of Block





Saturday, August 1, 2009

August's Free Silky - Mama Hummer

This beautiful little hummingbird decided to build her tiny nest just above our fish pond which, of course, gives her access to all sorts of flitting and flying critters as well as nectar from nearby flowers to keep herself and her babies well fed. She also has a well-stocked feeder whenever she wants a quick snack.

Her nest is about the size of half of a walnut shell, and her two eggs are about the size of pinto beans. It's so amazing to be able to follow the progress of this tiny creature!

AUGUST SILKY - Mama Hummer

Monday, July 20, 2009

July "Wings" Challenge

Following are three dragonflies I've posted in July's CQI "Wings" Challenge album.


Dragonfly Silky Painted for Kathi's HGTV CQ RR Valance
Painted with Jo Sonja's Acrylic Gouache


Beaded Dragonfly made for Tami's HGTV CQ RR Victorian block
The wings are made with clear iridescent dagger beads, the body is a cloisonne bead, and the tail is made from 6 iridescent oval beads.



Dragonfly made for Darlene's FFT #9 CQ block.
This dragonly is made from the same materials as the one above, except the wings are iridescent turquoise dagger beads. The head is a clear iridescent glass bead and the eyes are tiny iridescent Delica beads.



Sunday, July 19, 2009

CQI FFT #9

Darlene's first peek of my work on her block.




Close up of the dragonfly on Darlene's FFT #9 block.



Monday, July 13, 2009

HGTV CQ RR

MY MERMAID CQ

I've been wanting to make an "under the sea" themed crazy quilt for a long time, and this CQ RR gave me the opportunity. It has been wonderful to have my friends in the HGTV "Luv2Mbelish" group work on my Mermaid CQ. They have done a fantastic job of dressing up and beautifying my CQ !!! One of the most unbelievable things is that for some of the girls, this is their first CQ! I am so proud of all of them!!!



My Naked Block, (with naked mermaids!)

My Finished Block

Upper Left Block



Upper Right Block



Lower Left Block




Lower Right Block
Didn't the girls do a great job in making my block so beautiful?

Saturday, July 11, 2009

SILK RIBBON PANSY TUTORIAL

SILK RIBBON PANSY

This is the little pansy I came up with after some of the HGTV crazy quilting girls asked for a “real looking” silk ribbon pansy. I sat down with needle, thread, 13mm (about ½” wide) silk ribbon, pencil and gridded paper (which I can't seem to live without...), and the result is this fairly simple little pansy.

The three front petals will require about 7” of ribbon (mine is yellow), and the two back petals (purple) will need about 5”.

Illustration #1

Illustration #2


THE TWO BACK (purple) PETALS:
When looking at the above patterns, note that both of the back petals are made from one piece of ribbon, and are separated by the deep upside down “V” at the center of the length of ribbon. Notice, also, that the stitching/gathering line, shown on the pattern with a broken line, is done with one continuous length of thread, so you can gather it.

Using a pencil or a disappearing ink pen, draw a small 3/8” circle where you want your pansy to be. Draw a horizontal line through the center of the circle. Mark a dot in the center of the circle.

Using a very fine needle and thread that matches the silk, make the tiniest gathering stitches you can make, and run the continuous stitch as shown on the pattern, and described above. Draw the gathers up until the gathered edge of the ribbon will fit around the small half-circle that you have drawn. The gathered edge of the ribbon will be toward the center of the half-circle. Use several small stitches to attach the end of the gathered ribbon at the point where the half-circle and the horizontal line meet. Distribute the gathers evenly, being sure that the “V” shape is at the center top of the half-circle. Carefully pull the two center petals apart a little so the “V” between the two petals are a little more obvious. When you are satisfied with the arrangement of the petals, use the threaded needle to very carefully stab stitch the gathers in place all around the line of the upper half-circle. Again, take the time to be sure the gathers are evenly distributed before you tack them in place. The angled tips of the ribbons can be shortened to reduce bulk, and can then be tucked under and tacked in place.

Illustration #3


Illustration #4

THE THREE FRONT (yellow) PETALS:
Before beginning the yellow set of petals, notice that the three ribbon segments are not the same size. The larger segment will be the large yellow front petal. The two smaller yellow segments will be placed directly in front of, and sightly below the set of purple petals. (Please see Illus. #5 below.) The two yellow petals are the same size and shape as the set of purple petals. Begin your gathering stitches at the end of the yellow ribbon that has the two small segments, then continue your stitches until you've finished with the larger segment. This time you will pull the gathers up only on the segment that has the two small yellow petals, and working in a clockwise direction, fit the petals in place around the center dot in the circle. Using the center dot instead of the outer ring of the circle will automatically drop this second set of petals down below the original purple set. Distribute the gathers evenly; making sure that the “V” between the two yellow petals are aligned with the two purple petals. When you are satisfied with the arrangement of the petals, use a second needle and matching thread to tack the gathers in place. Take several tiny stitches to hold the two upper petals in place, but don't cut the thread. Using the original needle and gathering thread, tightly gather up the remaining large front petal, fold under the angled tip and then take the needle to the center dot and tack it in place. This will make large yellow petal lie in front of the smaller petals. Arrange the gathers as evenly as possible, and tack them in place. Turn under and tack down any of the angled tips that might be showing. If the tips are a little too bulky, you can trim them a little before tacking them in place.

Illustration #5



Illustration #6

You may need to tack the petals down in a couple of places, but do this sparingly, as the stitches can easily distort, and pull the petals out of shape. Often, just doing a little finger pressing will keep the petals in place.


Illustration #7

To finish the pansy you can sew a yellow or gold bead, or a pearl in the center, as shown above. Or, you can make a French knot using four strands of gold embroidery floss for the center, and a fly stitch (or two bullion stitches) for the pansy's little mustache.
The leaves shown above are acrylic “beads” found at local craft stores.


SILK RIBBON LEAVES:
Illustration #8

Cut a 2” length of 7mm green silk ribbon, and fold in half. Start at the folded end of the ribbon, and run a gathering stitch along the narrow selvage edge.

Illustration #9

Pull the thread and gather the ribbon slightly, and then fasten off with a couple of small stitches.

Illustration #10

Turn right side out and finger press the leaf flat. Gather the stem end of the leaf, fastening the thread securely, and then sew in place. Tack the leaf down using as few stitches as needed to do the job.
I hope you will be making lots of these sweet little pansies to make all of your CQ creations even more beautiful!
Carolyn

Naked Block

This is the beginning of my first CQ International Round Robin... I'm look forward to having a lot of fun!!! There are five girls in our group, Darlene, Ellen, Carolyn, Nicki, and Thearica.
Our CQ Angel is JoNZ.
Ellen's finished work on my cottage block...
Ellen was the first to work on my little cottage scene.
She embroidered tiny flowers on the rose vines and larkspurs.
I especially like the ones at the base of the mailbox!
You did a wonderful job Ellen!!!

I love the way Ellen sprinkled flower sequins and beads in the sky, and the clusters of yellow silk-ribbon flowers and leaves are beautiful!

Aren't Ellen's little bees cute?!!!!!
****************************************************************

The beginnings of my little cottage CQ block...

Painted Silky In Progress


Naked Block Close-Up



My naked block ready to make the rounds and get all dressed up.

Sunday, July 5, 2009

JULY SILKY

JULY SILKY - Blue Dragonfly

JUNE SILKY

JUNE BLOCK

Monday, June 29, 2009

CQMagOnline: Vintage Linens Gift Card Purse

This little gift card purse was a tutorial that was published in the October, 2008 issue of CQMagOnline: http://www.cqmagonline.com/vol07iss04/articles/862/index.shtml
In this same issue of CQOMagOnline is an interview with Pat Winter: http://www.cqmagonline.com/vol07iss04/articles/854/index.shtml


Wednesday, June 24, 2009

DESIGN WALL TUTORIAL

My husband and son put up a large, 96" wide x 84" tall, Design Wall for me last year, and I love it!!!
FABRIC:
I went to JoAnn Fabrics and I brought several small pieces of cotton fabric with me so I could see how well they would stick to the surface of different types of fabrics. I had heard that flannel worked well, and also that the backside of vinyl tablecloths. But, after trying different qualities and grades of flannel, I was really disappointed that none of them really held the cotton in place!!! BUT, what I did find that was absolutely perfect was FLEECE. There are a lot of different qualities of fleece, and the one I decided on was a fairly low-napped but thick fleece. In other words, it wasn't too fuzzy, but the weight and thickness of the fabric was impressive to me. I chose a cream color. Because the width of the fleece is 60" and each of my design wall panels is 48", I was able to have two completely seam-free panels. Plus, I was able to use my JoAnn 40% off coupon on the whole length of fabric!!!The fleece doesn't stretch much lengthwise, but is a little more stretchy width wise. Also, the fleece that I bought has a right side and a wrong side. When you're looking at the right side of the fabric, all you see is fuzz, but when you look at the wrong side, you can see the knitted fabric surface beneath the fuzz.You will have a lot of the fleece fabric left over, and I've found that it makes a wonderful, soft batting for baby quilts. It is also perfect for the needle pages in our sewing kits!!!

DESIGN WALL:
The guys purchased two sheets of 4'x 8'x 1/2" insulation board that's generally used for sound deadening. The insulation board also comes in 1.5" to 2" thickness.They can be purchased at Home Depot or Lowes. The insulation board being really lightweight is a real plus!

Since I could use the 96" combined width of the two panels, we didn't need to cut anything off. We did need to cut the length of each panel so it would fit the height of the wall.

The panels were attached to the wall by using three 1"x 2"x 40" wood strips that were attached horizontally (3" in from each side) across the top, the middle and the bottom of the back side of each panel. The bottom edge of each of the wood strips was cut to a 45 degree angle (creating a cleat) before attaching to the backside of each panels. (Please see illustration #1.)

Correspondingly spaced wood strips were attached to the wall. The top edge of each of the wood strips that will be attached to the wall with screws are cut to a 45 degree angle (creating a second set of cleats) that the panel cleats will fit into before being attached to the wall. (Please see Illustration #1)

Okay, it's time to upholster the panels with the fleece fabric. I used an electric staple gun (less than $20 at Lowes) and 1/4" staples. Lay the fleece on the floor with the wrong side facing up, and smooth out any wrinkles. Lay one of the panels on top of the fleece fabric with the wood strips facing up. The fleece can be generously trimmed before you begin stapling it in place. It's always better to have too much fabric than too little! Begin stapling at the top center of the panel, staple an 8" or 10" area, then go to the bottom center of the panel and staple the same amount there, being sure not to pull and stretch the fabric too much. Repeat until you're about 5" from the corner. Then adjust and smooth the fabric and begin stapling the sides of the panel alternating from one side to the other just as you did for the top and bottom. Finally, fold and staple the corners.

INSTALLATION:
To install your Design Wall, line up the wood strips of the panel with the wood strips attached to the wall, and then simply lift the panel up slightly and push gently toward the wall allowing the 45 degree angled cut to slide down and "nest" into the corresponding 45 degree angle cut of the wood strip attached to the wall. They fit together like puzzle pieces. (Please see Illustration #2)

This makes a really nice clean installation with no nails or screw heads showing.



Sunday, June 21, 2009

WELCOME TO MY NEW BLOG!!!

My goal for this blog is to share both my love of painting and my love of Crazy Quilting, plus a sprinkling of traditional "sane" quilting.

I still have a lot to learn, but I hope you will find enough of interest here to keep you coming back from time to time...

Thanks for visiting!

Carolyn